+34 931 145 425
The gama GARDAL de barandillas de aluminio de seguridad dispone de un amplio catálogo de modelos que se adaptan a los distintos tipos de azoteas de cualquier edificio.
The uprights are extruded profiles and can be straight, or bent or curved inwards to cover the rail.
These studs are inserted and fixed to the anchoring base.
Vertical adjustment of the uprights is facilitated by a block which allows three dimensional setting.
Leveling the rails and crossbar is achieved by a sliding bridle system. The articulated elbows and the caps ensure a perfect finish.
Overviews
REMINDER REQUIRED BY THE STANDARD DIMENSIONS EN ISO 14122-3
1. Minimum height: 1100 mm.
2. Maximum Gap: 500 mm.
3. Minimum height of the cornice: 150 mm.
Description
Overview
The supply and laying of aluminum railings in this lot must meet various regulatory texts in force, legislation and technical regulations.
Conception and application
The design and commissioning work of the Safety railings save conform to the European standard UNE EN ISO 14122-3.
Each model supports static and dynamic tests confirmed by a test performed by an independent control office.
Conceived to adapt to all kinds of media, and leveling assembly are very simple. An implementation plan accompanies each order facilitating commissioning work. A standard range of accessories allows bonding and fixing studs.
HORIZAL recommends using only chemical block and stainless steel hardware.
Description of work
FF Gardal The railing consists of an all aluminum structure.
The R816 extrusion studs and anchor bases HO612 allow adaptation to any height. Acodados inwardly curved, ensure R460 railing placement (silent. 52 mm) and the crossbar RN30 (silent. 30 mm) fully horizontal, through adjustable flanges.
A socket 150 mm high can be fitted on the underside of the uprights without additional machining. Roofs security is assured by respecting the architecture of the buildings.
The hardware is stainless and HO612 base only requires a M12. A shim adjustment ensures perfect O-D.
Railings Finishes
Finished choice:
Accessories
Area FF-SPAL is available in 2 serial versions:
SPAL supports are cast and integrated in a docking stand. The uprights are straight. Vertical adjustment of the uprights is facilitated by a block that enables three-dimensional adjustment and which is housed in the base of SPAL.
Leveling the rails and crossbar is achieved by a sliding bridle system. The articulated elbows and the caps ensure a perfect finish.
Overviews
REMINDER REQUIRED BY THE STANDARD DIMENSIONS EN ISO 14122-3
1. Minimum height: 1100 mm.
2. Maximum Gap: 500 mm.
3. Minimum height of the cornice or socket: 150 mm.
4. Maximum gap between the base and the level of circulating: 10 mm .
Description
Overview
The supply and laying of the aluminum rails del presente lote deben responder a los distintos textos reglamentarios en vigor, legislation and technical regulations.
Conception and application
The design and commissioning work of the Safety railings save conform to the European standard UNE EN ISO 14122-3.
Each model supports static and dynamic tests confirmed by a test performed by an independent control office.
Conceived to adapt to all kinds of media, and leveling assembly are very simple. An implementation plan accompanies each order facilitating commissioning work. A standard range of accessories allows bonding and fixing studs.
HORIZAL recommends using only chemical block and stainless steel hardware.
Description of work
The FF-SPAL Gardal railing consists of an all aluminum structure.
SPAL casting supports very high strength and dimensional setting, O by a shim, not require more than a single M12 steel screw fixation.
Allow placement of railing R460 (silent. 52 mm) and the crossbar RN30 (silent. 30 mm) with adjustable flange mounting achieving a perfectly horizontal.
A socket 150 mm high can be fitted to the bottom of supports SPAL.
Roofs security is ensured in a manner respecting the architectural aesthetics of the buildings.
Railings Finishes
Finished choice:
Accessories
The uprights are extruded profiles and can be straight, or bent or curved inwards to cover the rail.
Leveling the rails and crossbar is achieved by a sliding bridle system. The articulated elbows and the caps ensure a perfect finish.
FA area to place a crown on the railing of the ledge.
When the cornice parapet is in poor condition and it is difficult vertical adjustment of the uprights, recommend using FACS Gardal model has a foot with three-dimensional adjustment.
Overviews
REMINDER REQUIRED BY THE STANDARD DIMENSIONS EN ISO 14122-3
1. Minimum height: 1100 mm.
2. Maximum Gap: 500 mm.
3. Minimum height of the cornice or socket: 150 mm.
4. Maximum gap between the base and the level of circulating: 10 mm.
Description
Overview
The supply and laying of the aluminum rails del presente lote deben responder a los distintos textos reglamentarios en vigor, legislation and technical regulations.
Conception and application
The design and commissioning work of the Safety railings save conform to the European standard UNE EN ISO 14122-3.
Each model supports static and dynamic tests confirmed by a test performed by an independent control office.
Conceived to adapt to all kinds of media, and leveling assembly are very simple. An implementation plan accompanies each order facilitating commissioning work. A standard range of accessories allows bonding and fixing studs.
HORIZAL recommends using only chemical block and stainless steel hardware.
Description of work
The barandilla GARDAL FA is constituted by an aluminum structure throughout.
The R819 extrusion studs and anchor bases HO904 allow adaptation to different heights ledge. Acodados inwardly curved, ensure R460 railing placement (silent. 52 mm) and the crossbar RN30 (silent. 30 mm) fully horizontal, through adjustable flanges.
Space 60 mm left between the amount R819 and inside the railing of the ledge can put a shot that covers.
The hardware is stainless steel and the base is fixed HO904 2 M12.
Railings Finishes
Finished choice:
Accessories
SPAL supports are cast and integrated in a docking stand. The uprights are straight.
They are available in two standard heights:
Vertical adjustment of the uprights is facilitated by adjusting shim tridimensional.
Leveling the rails and crossbar is achieved by a sliding bridle system. The articulated elbows and the caps ensure a perfect finish.
Overviews
REMINDER REQUIRED BY THE STANDARD DIMENSIONS UNE ISO 14122-3
1. Minimum height: 1100 mm.
2. Maximum Gap: 500 mm.
3. Minimum height of the cornice: 150 mm.
Description
Overview
The supply and laying of the aluminum rails del presente lote deben responder a los distintos textos reglamentarios en vigor, legislation and technical regulations.
Conception and application
The design and commissioning work of the Safety railings save conform to the European standard UNE EN ISO 14122-3.
Each model supports static and dynamic tests confirmed by a test performed by an independent control office.
Conceived to adapt to all kinds of media, and leveling assembly are very simple. An implementation plan accompanies each order facilitating commissioning work. A standard range of accessories allows bonding and fixing studs.
HORIZAL recommends using only chemical block and stainless steel hardware.
Description of work
The barandilla GARDAL FA-SPAL is constituted by an aluminum structure throughout.
SPAL casting supports HO 203 / HO 217 can reglarse vertically thanks to a three-dimensional block O.
The railing R460 (silent. 52 mm) is fixed at the end of the bracket and crossbar RN30 (silent. 30 mm) is adjustable with sliding flange.
The hardware is stainless and the SPAL only requires a M12.
Railings Finishes
Finished choice:
Accessories
It is recommended when bearing surfaces are in poor condition and prove complicated the set of vertical. The uprights are extruded profiles and can be straight, or bent or curved inwards to cover the rail.
Vertical adjustment of the uprights is performed through a three-dimensional adjustment shim.
Leveling the rails and crossbar is achieved by a sliding bridle system. The articulated elbows and the caps ensure a perfect finish.
FACS Area allows the placement of a crown on the parapet of the cornice.
When the cornice parapet is in good condition is preferable to the model FA area.
Overviews
REMINDER REQUIRED BY THE STANDARD DIMENSIONS EN ISO 14122-3
1. Minimum height: 1100 mm.
2. Maximum Gap: 500 mm.
3. Minimum height of the cornice: 150 mm.
Description
Overview
The supply and laying of aluminum railings in this lot must meet various regulatory texts in force, legislation and technical regulations.
Conception and application
The design and commissioning work of the Safety railings save conform to the European standard UNE EN ISO 14122-3.
Each model supports static and dynamic tests confirmed by a test performed by an independent control office.
Conceived to adapt to all kinds of media, and leveling assembly are very simple. An implementation plan accompanies each order facilitating commissioning work. A standard range of accessories allows bonding and fixing studs.
HORIZAL recommends using only chemical block and stainless steel hardware.
Description of work
The barandilla GARDAL FACS structure is composed aluminum whole.
The R819 extrusion studs and anchor bases HO604 allow adaptation to variable height ledge or that require a delicate vertical adjustment, thanks to a three-dimensionally adjustable shim O.
Acodados inwardly curved, ensure R460 railing placement (silent. 52 mm) and the crossbar RN30 (silent. 30 mm) fully horizontal, by sliding flanges.
Space 40 mm left between the upright and R819 inside the cornice parapet allows placement of a crown.
The hardware is stainless and HO604 base only requires a M12.
Railings Finishes
Finished choice:
Accessories
GARDAL SZ is fixed on the parapet of the cornice.
The uprights are extruded profiles and can be placed vertically or inclined 30 °. They can also be curved or angled.
Leveling the rails and crossbar is achieved by a sliding bridle system. The articulated elbows and the caps ensure a perfect finish.
GARDAL SZ to place a crown on the railing of the ledge.
When the cornice parapet is in poor condition and it is difficult vertical adjustment of the uprights, recommend using the anchoring base HO 597 that has a spherical wedge-dimensional setting.
Overviews
REMINDER REQUIRED BY THE STANDARD DIMENSIONS UNE ISO 14122-3
1. Minimum height: 1100 mm.
2. Maximum Gap: 500 mm.
3. Minimum height of the cornice: 150 mm.
Description
Overview
The supply and laying of aluminum railings in this lot must meet various regulatory texts in force, legislation and technical regulations.
Conception and application
The design and commissioning work of the Safety railings save conform to the European standard UNE EN ISO 14122-3.
Each model supports static and dynamic tests confirmed by a test performed by an independent control office.
Conceived to adapt to all kinds of media, and leveling assembly are very simple. An implementation plan accompanies each order facilitating commissioning work. A standard range of accessories allows bonding and fixing studs.
HORIZAL recommends using only chemical block and stainless steel hardware.
Description of work
The barandilla GARDAL SZ structure is composed aluminum whole.
HO anchor bases 1097 are fixed on the ledge by a steel screw M12. The R819 extrusion studs can be attached to the anchor bases HO 1097 either upright or tilted 30 ° to the inside.
The railing R460 (silent. 52 mm) and the crossbar RN30 (silent. 30 mm) Sliding clamps are mounted on allowing a perfect fit horizontally.
HO base 1097 to place a crown on the ledge. If the parapet of the cornice is in disrepair, is recommended to use the HO basis 597 with three-dimensional spherical wedge.
Railings Finishes
Finished choice:
Accessories
The anchoring base compensates and insulation thickness of the coating allows tight jointing below the upper collar.
For tiled roofs with stilt, GARDAL SE allows for perfect leveling of the tiles meet.
The uprights are extruded profiles and can be straight, bent or curved inwards to cover the rail. The vertical adjustment is facilitated by a three-dimensional setting spherical fit under the base housed (optionally available).
Aligning the rails and crossbar is achieved by a sliding bridle system. The articulated elbows and the caps ensure a perfect finish.
Overviews
REMINDER REQUIRED BY THE STANDARD DIMENSIONS EN ISO 14122-3
1. Minimum height: 1100 mm.
2. Maximum Gap: 500 mm.
3. Minimum height of the cornice: 150 mm.
Description
Overview
The supply and laying of aluminum railings in this lot must meet various regulatory texts in force, legislation and technical regulations.
Conception and application
The design and commissioning work of the Safety railings save conform to the European standard UNE EN ISO 14122-3.
Each model supports static and dynamic tests confirmed by a test performed by an independent control office.
Conceived to adapt to all kinds of media, and leveling assembly are very simple. An implementation plan accompanies each order facilitating commissioning work. A standard range of accessories allows bonding and fixing studs.
HORIZAL recommends using only chemical block and stainless steel hardware.
Description of work
The barandilla GARDAL SE structure is composed aluminum whole.
HO anchor bases 598 are fixed directly on asphalt layer, allow placement of the insulation and the meeting of the sealing layer underneath the collars of the anchoring base.
The struts are integrated R819 factory base to ensure a perfect seal. Bent or curved inwards, handrails ensure placement and the crossbar R460 RN30 (silent. 30 mm) in perfectly horizontal flanges by sliding.
The upper collar of the base allows a meeting flush in the case of tiles on pivots.
The screws are stainless steel and the mounting plate is secured with two bolts M12.
Railings Finishes
Finished choice:
Accessories
Stiles, Extrusion profiles, may be straight or curved or angled inward to hide the rail when in raised position.
In case it is required to make the anchor above the cornice, should be provided one piece bracket that allows the base set vertically.
Aligning the rails and crossbar is achieved by a sliding bridle system. The articulated elbows and the caps ensure a perfect finish.
GARDAL SK allows the placement of a crown on the parapet of the cornice.
GARDAL SK is provided for segments 3,25 meters long with three uprights maximum.
Overviews
REMINDER REQUIRED BY THE STANDARD DIMENSIONS EN ISO 14122-3
1. Minimum height: 1100 mm.
2. Maximum Gap: 500 mm.
3. Minimum height of the cornice: 150 mm.
Description
Overview
The supply and laying of aluminum railings in this lot must meet various regulatory texts in force, legislation and technical regulations.
Conception and application
The design and commissioning work of the Safety railings save conform to the European standard UNE EN ISO 14122-3.
Each model supports static and dynamic tests confirmed by a test performed by an independent control office.
Conceived to adapt to all kinds of media, and leveling assembly are very simple. An implementation plan accompanies each order facilitating commissioning work. A standard range of accessories allows bonding and fixing studs.
HORIZAL recommends using only chemical block and stainless steel hardware.
Description of work
The barandilla GARDAL SK consists of an all-aluminum structure.
The uprights are factory R819 coupled HO bases 600. May be retracted inwardly by elements 3,25 ml maximum, handled by one person.
The railing R460 (silent. 52 mm) and the crossbar RN30 (silent. 30 mm) are fixed to the uprights R819 by sliding flanges allowing a perfect fit horizontally.
The lateral attachment of the bases HO 600 is secured by 2 stainless steel screw and plug for M12. Places a crown over the cornice parapet.
Railings Finishes
Finished choice:
Accessories
Both surface and is attached laterally to the support. In the retracted position, is perfectly hidden to respect the architecture of an airport hall, exhibition pavilion. The uprights are straight.
Stowed in direction of travel, does not exceed the set height 140mm. A lift cylinder on each upright maneuver facilitates, even for runs 6,5 ml.
A locking system ensures the maintenance of the retracted position.
Leveling the rails and crossbar is achieved by a system of flanges
Sliding.
Overviews
REMINDER REQUIRED BY THE STANDARD DIMENSIONS EN ISO 14122-3
1. Minimum height: 1100 mm.
2. Maximum Gap: 500 mm.
3. Minimum height of the cornice: 150 mm.
Description
Overview
The supply and laying of aluminum railings in this lot must meet various regulatory texts in force, legislation and technical regulations.
Conception and application
The design and commissioning work of the Safety railings save conform to the European standard UNE EN ISO 14122-3.
Each model supports static and dynamic tests confirmed by a test performed by an independent control office.
Conceived to adapt to all kinds of media, and leveling assembly are very simple. An implementation plan accompanies each order facilitating commissioning work. A standard range of accessories allows bonding and fixing studs.
HORIZAL recommends using only chemical block and stainless steel hardware.
Description of work
The barandilla GARDAL SR consists of an all-aluminum structure.
The R819 uprights are attached to the bases HO 481 can, with the help of small cylinders, be replicated horizontally and disappear from public view (stowed height 140 mm).
Easily manageable, even for great lengths, the system is automatically locked in the retracted position.
The railing R460 (diam.52mm) and the crossbar RN30 (silent. 30 mm) fixing the amount R819 by allowing sliding flanges replicate the set.
The fasteners are stainless, using the screws on base.
Railings Finishes
Finished choice:
Accessories
Security AP area is linked to the presence of concrete counterweights. It should check if the deck can support such overload.
Concrete counterweights are designed to be moved easily. Its cast is indicated in terms of implementation provided by HORIZAL.
Stiles, Extrusion profiles, may be straight or curved or angled inward to better disguise the rail.
AP area can be supplied with or without base.
Aligning the rails and crossbar is achieved by a sliding bridle system. The articulated elbows and the caps ensure a perfect finish.
Overviews
REMINDER REQUIRED BY THE STANDARD DIMENSIONS EN ISO 14122-3
1. Minimum height: 1100 mm
2. Maximum Gap: 500 mm
3. Minimum height of the cornice or socket: 150 mm
4. Maximum gap between the base and the level of circulating: 10 mm
Description
Overview:
The supply and laying of aluminum railings in this lot must meet various regulatory texts in force, legislation and technical regulations.
Conception and application
The design and commissioning work of the Safety railings save conform to the European standard UNE EN ISO 14122-3.
Each model supports static and dynamic tests confirmed by a test performed by an independent control office.
Conceived to adapt to all kinds of media, and leveling assembly are very simple.
An implementation plan accompanies each order facilitating commissioning work.
A standard range of accessories allows bonding and fixing studs.
HORIZAL recommends using only chemical block and stainless steel hardware.
Description of work
The barandilla GARDAL AP is constituted by an aluminum-concrete structure.
The uprights vertically and horizontally R819 employees are united by pieces that can be set upright or inclined at 30 ° to the inside. May be curved or angled.
R460 Handrails (silent. 52 mm) Sliding clamps are fixed by allowing a perfect fit horizontally. An aluminum base 150 mm in height can be placed on the uprights R819.
Stability AP area is secured by the concrete designed so they can be moved with ease. Should be checked in advance that the roof can support this overload.
Railings Finishes
Finished choice:
Accessories
Barandillas de aluminio ANTARES
A classical balcony and elegant flowing lines
El diseño está presente en este modelo de barrotes.
La línea “perfilada” de los pasamanos y los barrotes ovalados con formas redondeadas, le confieren un aspecto general innovador.
Reference
Con miles de metros instalados por todo el mundo, la barandilla AREAL es el modelo HORIZAL “de referencia”.
Se adapta a todos los estilos arquitectónicos con un notable toque de personalidad.
